ROM galaxy a32 4g android 11 (SM-A325MDS)
Para esse celular o Android 11 é o melhor caso você esteja com Android 13. Seu celular não vai funcionar muito bem vai esquentar muito e não dura um dia a bateria.
TWRP para Samsung Galaxy A32 A32 (SM-A325MDS)
===================
02- DESBLOQUEA BOOTLOADER de qualquer SAMSUNG
=====================
- Install:
- Unlock Bootloader:
- Go to Settings > About Phone > About Software. Tap build number (10 times) until "you are now a developer" toast shows up.
- Go back, go to Developer Settings.
- Turn on OEM unlock toggle.
- Turn off your phone, hold vol-up + vol-down, then plug in charging cable (please don't use 3rd-party charging-only cable, it must have data transfer capability).
Your device will boot into download mode with a warning. Accept it. - Hold volume-up until the phone shows the bootloader unlock panel "Unlock Bootloader?".
- Press volume-up again. Now your phone bootloader is unlocked.
<!> It will now begin the process of wiping data. Let it do its job.
- When it reboots to OS, finish setting up your device.
Double check to make sure OEM Unlock is still ON.
- Preparing for the installation:
- Download everything above onto your PC.
- Install Samsung USB Driver.
- Open Odin.
- Connect your phone to your PC. There should be a COM entry on the top.
- Make sure your phone is in Download Mode. (see step 4 of section Unlock Bootloader)
- Make sure that OEM LOCK and REACTIVATION LOCK on your screen show "OFF". If it's not off, DO NOT PROCEED ANY FURTHER.
<!> For those with lock ON, use your device for 7 days without rebooting once. Then check the locks above again.
- Installing:
- Ensure phone is in Download mode.
- In Odin:
- Load in Userdata: VBMeta_disabler.tar file.
- Load in AP: TWRP TAR file.
- Prepare yourself. keep your hand on Volume-up and Power button (don't press yet).
- In Odin, press Start. It will flash, then reboot. When the screen turned off, quickly press Vol-up and Power button to boot to recovery (this should take about 20~30 seconds).
<!> You should have TWRP up and running now.
- Post-Installation:
- MUST: Trigger Multi-disabler.
- In TWRP, go to Advanced > Terminal.
- Type
multidisabler
, then enter. If it fails with something about vendor free space, run it again. - Run
multidisabler
again. - Go to main screen. go to Wipe > Format Data, type
yes
then swipe. - Reboot to Recovery. Now you can do other stuff.
If you have TWRP or any custom recovery installed and bootable, you can upgrade instead; Look below.
<!> the installation will require WIPING DATA. You will also lose access to all Knox-based solutions like Secure Folder.
Backup every precious data you have on your phone.
<!> PC is required. Windows is preferred. (You probably know what you are doing when using Linux/Heimdall. We don't talk about Macs)
multidisabler
multidisabler
Ao fazer esse procedimento é possível ativar o Camera2 API? No app camera probe mostra como full access?
ResponderExcluirEu atualizei essa postagem. Sobre sua câmera eu não sei, so sei que terá Root.
ResponderExcluirDispara o knox?
ResponderExcluir